EDI Water Treatment System/EDI Water Treatment facility

1.CE/ISO/NSF EDI equipment 2.EDI water treatment equipment/ system 3.RO water as feed water,Continual water product

                                   EDI Water Treatment System/EDI Water Treatment facility

                                           Edi water treatment plant for sale

1.CE/ISO/NSF EDI equipment 2.Best price with best quality 3.RO water as feed water,Continual water product

EDI water treatment system/ facility: 

EDI water treatment equipmentHigher produced water qualityUtilization rate >95%EDI controller,EDI water treatment

2>water treatment system/facility Advantage: 

1.Has higher producing water quality2.High rate of desalination3.Utilization rate reach up over 95%4.Resin doesn't need to regenerate5.Convenient: Run\operate\maintain6.It has standard design, Module can be piled according to requirements of proudcing water, to adapt requirements of more water yield7.It has Low operating cost, low consumption, when produce 3.8m3, it costs 1KW

8.Stable effluent water\low operating cost\convenient management\small foot-print, etc. 

  

3>Water application:

1. Suitable water source: Tap water, surface well water,

2. Inlet water TDS limit: Below 2000PPM(for other water source, please provide us water report for detailed analysis for choosing RO membrane)

3. Water recovery rate: 70%

4. RO membrane salt rejection rate: 99%

5. Treatment water TDS range: 30-50ppm(bottled water standard)

6.reverse osmosis drinking water system,reverse osmosis water filtration system,commercial reverse osmosis system

4>Reverse Osmosis System Installation:

1. Raw water pump-provide the pressure to silica sandfilter/active carbon filter

2. Silica sand filter-get rid of turbidity, suspended mater, organic matter, colloid and so on.

3. Active carbon filter-remove the color, free chloride, organic matter, harmful matter and so on.

4. Micron filterprevent any deposition of large Particles, most of the bacteria, and viruses into the RO membrane, the accuracy is 5 um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.

5. High pressure pump-provide the high pressure to RO membrane(at least 2.0Mpa)

Parameter  of water treatment system/ plant:

Model	Output water  (m3/h)	Concentrated water capacity (m3/h)	Electrode Water (m3/h)	Voltage (V, DC)	Current (A,DC)
SY-EDI-0.5	0.5	0.04-0.21	0.04- --0.06	35-50	2-6
SY-EDI-1	1	0.09-0.36		60-90
SY-EDI-2	2	0.18-0.66		115-180
SY-EDI-3	3	0.3- 1.08		180-300
SY-EDI-6	6	0.6 -2.16		360-600
SY-TLQ-12	12	1.2-4.32		720-1200
SY-TLQ-24	24	2.4-8.64		1440-2400

EDI Water Treatment System/EDI Water Treatment facility